| Step | | Procedure & Parts & Tools |
| 1 |
|
IF YOUR MACHINE HAS THE GRAY SOLENOID VALVE START AT STEP 2. IF YOUR MACHINE HAS THE BLACK SOLENOID VALVE, DRAIN THE TANKS AND GO TO STEP 10.
|
| 2 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 3 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 4 |
|
LOCATE SOLUTION FILTER
|
| 5 |
|
TURN CAP AND PULL TO REMOVE SOLUTION FILTER
|
| 6 |
|
REMOVE THE 2 SCREWS HOLDING SOLENOID VALVE ASSEMBLY TO MACHINE
| Screwdriver-phillips |
|
|
| 7 |
|
PULL THE SOLENOID VALVE ASSEMBLY THRU WALL OF MACHINE
|
| 8 |
|
PULL THE SOLENOID VALVE ASSEMBLY FROM UNDER THE MACHINE
|
| 9 |
|
PULL THE CONNECTORS TO DISCONNECT THE 2 BLACK WIRES FROM THE SOLENOID VALVE.(GRAY SOLENOID VALVE IS NO LONGER AVAILABLE. SKIP TO STEP 11 TO INSTALL THE NEW SOLENOID VALVE.
|
| 10 |
|
REMOVE THE YELLOW CAP(A). DISCONNECT THE 2 WIRE CONNECTORS(B).LOOSEN THE 2 HOSE CLAMPS(C AND D).SLIDE THE SOLENOID VALVE OUT OF THE MACHINE.
| Screwdriver-flat tip |
|
|
| 11 |
|
REVERSE STEP 12 TO INSTALL A NEW SOLENOID VALVE
|